A library of scientific works for which extruders, rolling mills or other Zamak Mercator devices were used

We would like to inform you that the National Library of Medicine Bethesda USA has published scientific papers, to which extruders, rolling mills or other laboratory equipment produced by Zamak Mercator contributed. An official website of the United States government National Library of Medicine 8600 Rockville Pike Bethesda, MD 20894 https://www.ncbi.nlm.nih.gov

1 : Insights into the Thermo-Mechanical Treatment of Brewers' Spent Grain as a Potential Filler for Polymer Composite s
Aleksander Hejna, Mariusz Marć, Daria Kowalkowska-Zedler, Agnieszka Pladzyk, Mateusz Barczewski
Polymers (Basel) 2021 Mar; 13(6): 879 Published online 2021 Mar 12doi: 10.3390/polym13060879
PMCID: PMC7999812

2: Mechanical Properties of Polylactide Admixed with Carbon Nanotubes or Graphene Nanopowder
Piotr Szatkowski, Leszek Czechowski, Jacek Gralewski, Martyna Szatkowska
Materials (Basel) 2021 Oct; 14(20): 5955 Published online 2021 Oct 11doi: 10.3390/ma14205955
PMCID: PMC8539563

3: Examining the Influence of Re–Used Nanofiller—Pyrolyzed Montmorillonite, on the Thermal Properties of Polypropylene–Based Engineering Nanocomposites
Tomasz MMajka, Oskar Bartyzel, Konstantinos NRaftopoulos, Joanna Pagacz, Krzysztof Pielichowski
Materials (Basel) 2019 Aug; 12(16): 2636 Published online 2019 Aug 19doi: 10.3390/ma12162636
PMCID: PMC6720894

4: The Accelerated Aging Impact on Mechanical and Thermal Properties of Polypropylene Composites with Sedimentary Rock Opoka-Hybrid Natural Filler
Paulina Jakubowska, Grzegorz Borkowski, Dariusz Brząkalski, Bogna Sztorch, Arkadiusz Kloziński, Robert EPrzekop
Materials (Basel) 2022 Jan; 15(1): 338 Published online 2022 Jan 4doi: 10.3390/ma15010338
PMCID: PMC8745994

5: Supermolecular Structure of Poly(Butylene Terephthalate) Fibers Formed with the Addition of Reduced Graphene Oxide
Czeslaw Slusarczyk, Marta Sieradzka, Janusz Fabia, Ryszard Fryczkowski
Polymers (Basel) 2020 Jul; 12(7): 1456 Published online 2020 Jun 29doi: 10.3390/polym12071456
PMCID: PMC7407616

Fig. 6: Fused Deposition Modeling as a Possible Approach for the Preparation of Orodispersible Tablets
Thao Tranova, Jolanta Pyteraf, Mateusz Kurek, Witold Jamróz, Witold Brniak, Dita Spálovská, Jan Loskot, Karolina Jurkiewicz, Joanna Grelska, Daniel Kramarczyk, Jitka Mužíková, Marian Paluch, Renata Jachowicz
Pharmaceuticals (Basel) 2022 Jan; 15(1): 69 Published online 2022 Jan 5doi: 10.3390/ph15010069
PMCID: PMC8781976

7: TEM Study of the Microstructure of an Alumina/Al Composite Prepared by Gas-Pressure Infiltration
Krzysztof Matus, Grzegorz Matula, Mirosława Pawlyta, Jagoda Krzysteczko-Witek, Błażej Tomiczek
Materials (Basel) 2022 Sep; 15(17): 6112 Published online 2022 Sep 2doi: 10.3390/ma15176112
PMCID: PMC9457870

8: How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?
Jolanta Pyteraf, Witold Jamróz, Mateusz Kurek, Joanna Szafraniec-Szczesny, Daniel Kramarczyk, Karolina Jurkiewicz, Justyna Knapik-Kowalczuk, Jacek Tarasiuk, Sebastian Wroński, Marian Paluch, Renata Jachowicz
Molecules2021Jun; 26(11): 3106 Published online 2021 May 22doi: 10.3390/molecules26113106
PMCID: PMC8196966

9: Experimental Determination of Coefficients for the Renner Model of the Thermodynamic Equation of State of the Poly(butylene succinate) and Wheat Bran Biocomposites
Emil Sasimowski, Łukasz Majewski, Tomasz Jachowicz, Michał Sąsiadek
Materials (Basel) 2021 Sep; 14(18): 5293 Published online 2021 Sep 14doi: 10.3390/ma14185293
PMCID: PMC8467114

10: The Impact of the Preparation Method on the Properties of Orodispersible Films with Aripiprazole: Electrospinning vsCasting and 3D Printing Methods
Ewelina Łyszczarz, Witold Brniak, Joanna Szafraniec-Szczesny, Tomasz M.Majka, Dorota Majda, Marta Zych, Krzysztof Pielichowski, Renata Jachowicz
Pharmaceutics2021 Aug; 13(8): 1122 Published online 2021 Jul 22doi: 10.3390/pharmaceutics13081122
PMCID: PMC8401512

11: Enhanced Thermal Conductivity of Polyamide-Based Nanocomposites Containing Graphene Oxide Sheets Decorated with Compatible Polymer Brushes
Łukasz Łątka, Kamil Goc, Czesław Kapusta, Szczepan Zapotoczny
Materials (Basel) 2021 Feb; 14(4): 751 Published online 2021 Feb 5doi: 10.3390/ma14040751
PMCID: PMC7914667

12: Efficiency of Twin-Screw Extrusion of Biodegradable Poly (Butylene Succinate)-Wheat Bran Blend
Emil Sasimowski, Lukasz Majewski, Marta Grochowicz
Materials (Basel) 2021 Jan; 14(2): 424 Published online 2021 Jan 16doi: 10.3390/ma14020424
PMCID: PMC7829807

13: Multivariate Design of 3D Printed Immediate-Release Tablets with Liquid Crystal-Forming Drug—Itraconazole
Witold Jamróz, Jolanta Pyteraf, Mateusz Kurek, Justyna Knapik-Kowalczuk, Joanna Szafraniec-Szczesny, Karolina Jurkiewicz, Bartosz Leszczyński, Andrzej Wróbel, Marian Paluch, Renata Jachowicz
Materials (Basel) 2020 Nov; 13(21): 4961 Published online 2020 Nov 4doi: 10.3390/ma13214961
PMCID: PMC7662355

Fig. 14: Influence of MgO-Lignin Dual Component Additives on Selected Properties of Low Density Polyethylene
Karol Bula, Grzegorz Kubicki, Adam Kubiak, Teofil Jesionowski, Łukasz Klapiszewski
Polymers (Basel) 2020 May; 12(5): 1156 Published online 2020 May 18doi: 10.3390/polym12051156
PMCID: PMC7284739

Fig. 15: The Mechanical Properties Prediction of Poly [(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] (PHBV) Biocomposites on a Chosen Example
Grzegorz Janowski, Wieslaw Frącz, Lukasz Bak
Materials (Basel) 2022 Nov; 15(21): 7531 Published online 2022 Oct 27doi: 10.3390/ma15217531
PMCID: PMC9653988

16: Carbonate Lake Sediments in the Plastics Processing-Preliminary Polylactide Composite Case Study: Mechanical and Structural Properties
Grzegorz Borkowski, Agnieszka Martyła, Marta Dobrosielska, Piotr Marciniak, Ewa Gabriel, Julia Głowacka, Marek Jałbrzykowski, Daria Pakuła, Robert EPrzekop
Materials (Basel) 2022 Sep; 15(17): 6106 Published online 2022 Sep 2doi: 10.3390/ma15176106
PMCID: PMC9457890

17: The Relationship between a Rotational Molding Processing Procedure and the Structure and Properties of Biobased Polyethylene Composites Filled with Expanded Vermiculite
Joanna Aniśko, Mateusz Barczewski, Adam Piasecki, Katarzyna Skórczewska, Joanna Szulc, Marek Szostak
Materials (Basel) 2022 Sep; 15(17): 5903 Published online 2022 Aug 26doi: 10.3390/ma15175903
PMCID: PMC9457396

18: The Use of Nanoscale Montmorillonite (MMT) as Reinforcement for Polylactide Acid (PLA) Prepared by Fused Deposition Modeling (FDM)—Comparative Study with Biocarbon and Talc Fillers
Jacek Andrzejewski, Mateusz Markowski, Mateusz Barczewski
Materials (Basel) 2022 Aug; 15(15): 5205 Published online 2022 Jul 27doi: 10.3390/ma15155205
PMCID: PMC9369621

19: The Friction of Structurally Modified Isotactic Polypropylene
Natalia Wierzbicka, Tomasz Sterzyński, Marek Nowicki
Materials (Basel) 2021 Dec; 14(23): 7462 Published online 2021 Dec 5doi: 10.3390/ma14237462
PMCID: PMC8659012

20: The Influence of Chosen Plant Fillers in PHBV Composites on the Processing Conditions, Mechanical Properties and Quality of Molded Pieces
Wieslaw Frącz, Grzegorz Janowski, Robert Smusz, Marek Szumski
Polymers (Basel) 2021 Nov; 13(22): 3934 Published online 2021 Nov 14.doi: 10.3390/polym13223934
PMCID: PMC8625057

21: The Use of Computed Tomography in the Study of Microstructure of Molded Pieces Made of Poly(3-hydroxybutyric-co-3-hydroxyvaleric acid) (PHBV) Biocomposites with Natural Fiber
Wiesław Frącz, Grzegorz Janowski, Maciej Pruchniak, Łukasz Walek
Polymers (Basel) 2021 Sep; 13(17): 2942 Published online 2021 Aug 31doi: 10.3390/polym13172942
PMCID: PMC8433640

22: The Role of Inorganic-Organic Bio-Fillers Containing Kraft Lignin in Improvement in Functional Properties of Polyethylene
Karol Bula, Łukasz Klapiszewski, Adam Piasecki, Teofil Jesionowski
Materials (Basel) 2021 May; 14(9): 2114 Published online 2021 Apr 22doi: 10.3390/ma14092114
PMCID: PMC8122499

23: Influence of the Alkali Treatment of Flax and Hemp Fibers on the Properties of PHBV Based Biocomposites
Wieslaw Frącz, Grzegorz Janowski, Lukasz Bak
Polymers (Basel) 2021 Jun; 13(12): 1965 Published online 2021 Jun 14doi: 10.3390/polym13121965
PMCID: PMC8232267

24: The Influence of the Hybridization Process on the Mechanical and Thermal Properties of Polyoxymethylene (POM) Composites with the Use of a Novel Sustainable Reinforcing System Based on Biocarbon and Basalt Fiber (BC/BF)
Jacek Andrzejewski, Bartosz Gapinski, Aminul Islam, Marek Szostak
Materials (Basel) 2020 Aug; 13(16): 3496 Published online 2020 Aug 7doi: 10.3390/ma13163496
PMCID: PMC7475888

25: The Influence of Sub-Zero Conditions on the Mechanical Properties of Polylactide-Based Composites
Olga Mysiukiewicz, Mateusz Barczewski, Arkadiusz Kloziński
Materials (Basel) 2020 Dec; 13(24): 5789 Published online 2020 Dec 18doi: 10.3390/ma13245789
PMCID: PMC7765876

26: Development of Thermal Resistant FDM Printed BlendsThe Preparation of GPET/PC Blends and Evaluation of Material Performance
Jacek Andrzejewski, Lidia Marciniak-Podsadna
Materials (Basel) 2020 May; 13(9): 2057 Published online 2020 Apr 29doi: 10.3390/ma13092057
PMCID: PMC7254323

27: Mechanical, Thermal and Rheological Properties of Polyethylene-Based Composites Filled with Micrometric Aluminum Powder
Olga Mysiukiewicz, Paulina Kosmela, Mateusz Barczewski, Aleksander Hejna
Materials (Basel) 2020 Mar; 13(5): 1242 Published online 2020 Mar 9doi: 10.3390/ma13051242
PMCID: PMC7085091

28: Injection Molding of Highly Filled Polypropylene-based BiocompositesBuckwheat Husk and Wood Flour Filler: A Comparison of Agricultural and Wood Industry Waste Utilization
Jacek Andrzejewski, Mateusz Barczewski, Marek Szostak
Polymers (Basel) 2019 Nov; 11(11): 1881 Published online 2019 Nov 14doi: 10.3390/polym11111881
PMCID: PMC6918422

29: Preliminary Characterization of Novel LDPE-Based Wear-Resistant Composite Suitable for FDM 3D Printing
Piotr Olesik, Marcin Godzierz, Mateusz Kozioł
Materials (Basel) 2019 Aug; 12(16): 2520 Published online 2019 Aug 8doi: 10.3390/ma12162520
PMCID: PMC6719240

30: Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing
Damien Rasselet, Anne-Sophie Caro-Bretelle, Aurélie Taguet, Jose-Marie Lopez-Cuesta
Materials (Basel) 2019 Feb; 12(3): 485 Published online 2019 Feb 5doi: 10.3390/ma12030485
PMCID: PMC6384960

31: Performance of an Innovative Low-Cost Recycled Filling (LCRF) in Anaerobic Treatment of Dairy Effluent—A Pilot-Scale Study
Marcin Zieliński, Marcin Dębowski, Joanna Kazimierowicz
Materials (Basel) 2022 Nov; 15(21): 7815 Published online 2022 Nov 5.doi: 10.3390/ma15217815
PMCID: PMC9655942

Fig. 32: Formation of UHMWPE Nanofibers during Solid-State Deformation
Ramin Hosseinnezhad, Iurii Vozniak, Dario Romano, Sanjay Rastogi, Gilles Regnier, Ewa Piorkowska, Andrzej Galeski
Nanomaterials (Basel) 2022 Nov; 12(21): 3825 Published online 2022 Oct 29doi: 10.3390/nano12213825
PMCID: PMC9654675

33: Flame-Retarding Properties of Injected and 3D-Printed Intumescent Bio-Based PLA Composites: The Influence of Brønsted and Lewis Acidity of Montmorillonite
Raíssa Carvalho Martins, Simone Pereira da Silva Ribeiro, Michelle Jakeline Cunha Rezende, Regina Sandra Veiga Nascimento, Marco Antonio Chaer Nascimento, Marcos Batistella, José-Marie Lopez-Cuesta
Polymers (Basel) 2022 May; 14(9): 1702 Published online 2022 Apr 21doi: 10.3390/polym14091702
PMCID: PMC9105856

34: Processing, Performance Properties, and Storage Stability of Ground Tire Rubber Modified by Dicumyl Peroxide and Ethylene-Vinyl Acetate Copolymers
Paulina Wiśniewska, Lukasz Zedler, Krzysztof Formela
Polymers (Basel) 2021 Nov; 13(22): 4014 Published online 2021 Nov 20doi: 10.3390/polym13224014
PMCID: PMC8621922

35: High-Impact Polystyrene Reinforced with Reduced Graphene Oxide as a Filament for Fused Filament Fabrication 3D Printing
Marta Sieradzka, Janusz Fabia, Dorota Binias, Tadeusz Graczyk, Ryszard Fryczkowski
Materials (Basel) 2021 Nov; 14(22): 7008 Published online 2021 Nov 19doi: 10.3390/ma14227008
PMCID: PMC8623337

36: Piezoelectric A15B16C17 Compounds and Their Nanocomposites for Energy Harvesting and Sensors: A Review
Piotr Szperlich
Materials (Basel) 2021 Nov; 14(22): 6973 Published online 2021 Nov 18doi: 10.3390/ma14226973
PMCID: PMC8623261

37: Modification of Poly(lactic acid) by the Plasticization for Application in the Packaging Industry
Karolina Gzyra-Jagieła, Konrad Sulak, Zbigniew Draczyński, Stepan Podzimek, Stanisław Gałecki, Sylwia Jagodzińska, Dominik Borkowski
Polymers (Basel) 2021 Nov; 13(21): 3651 Published online 2021 Oct 23doi: 10.3390/polym13213651
PMCID: PMC8587787

38: Plasticized Poly(vinyl chloride) Modified with Developed Fire Retardant System Based on Nanoclay and L-histidinium Dihydrogen Phosphate-Phosphoric Acid
Kamila Sałasińska, Mateusz Barczewski, Maciej Celiński, Paweł Kozikowski, Rafał Kozera, Aleksandra Sodo, Jacek Mirowski, Stanisław Zajchowski, Jolanta Tomaszewska
Polymers (Basel) 2021 Sep; 13(17): 2909 Published online 2021 Aug 29doi: 10.3390/polym13172909
PMCID: PMC8433658

39: Polyethylene/Polyamide Blends Made of Waste with Compatibilizer: Processing, Morphology, Rheological and Thermo-Mechanical Behavior
Dorota Czarnecka-Komorowska, Jagoda Nowak-Grzebyta, Katarzyna Gawdzińska, Olga Mysiukiewicz, Małgorzata Tomasik
Polymers (Basel) 2021 Jul; 13(14): 2385 Published online 2021 Jul 20doi: 10.3390/polym13142385
PMCID: PMC8309537

40: Ground Tire Rubber Filled Flexible Polyurethane Foam—Effect of Waste Rubber Treatment on Composite Performance
Paulina Kosmela, Adam Olszewski, Łukasz Zedler, Paulina Burger, Adam Piasecki, Krzysztof Formela, Aleksander Hejna
Materials (Basel) 2021 Jul; 14(14): 3807 Published online 2021 Jul 7doi: 10.3390/ma14143807
PMCID: PMC8304020

41: Peculiar Morphologies Obtained for 80/20 PLA/PA11 Blend with Small Amounts of Fumed Silica
Damien Rasselet, Monica Francesca Pucci, Anne-Sophie Caro-Bretelle, José-Marie Lopez-Cuesta, Aurélie Taguet
Nanomaterials (Basel) 2021 Jul; 11(7): 1721 Published online 2021 Jun 29.doi: 10.3390/nano11071721
PMCID: PMC8308147

42: In Situ Generation of Green Hybrid Nanofibrillar Polymer-Polymer Composites—A Novel Approach to the Triple Shape Memory Polymer Formation
Ramin Hosseinnezhad, Iurii Vozniak, Fahmi Zaïri
Polymers (Basel) 2021 Jun; 13(12): 1900 Published online 2021 Jun 8doi: 10.3390/polym13121900
PMCID: PMC8226873

43: Mater-Bi/Brewers' Spent Grain Biocomposites—Novel Approach to Plant-Based Waste Filler Treatment by Highly Efficient Thermomechanical and Chemical Methods
Aleksander Hejna, Mateusz Barczewski, Paulina Kosmela, Olga Mysiukiewicz, Paweł Sulima, Jerzy Andrzej Przyborowski, Daria Kowalkowska-Zedler
Materials (Basel) 2022 Oct; 15(20): 7099 Published online 2022 Oct 12doi: 10.3390/ma15207099
PMCID: PMC9605683

44: Insights into Stoichiometry Adjustments Governing the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites
Adam Olszewski, Paulina Kosmela, Wiktoria Żukowska, Paweł Wojtasz, Mariusz Szczepański, Mateusz Barczewski, Łukasz Zedler, Krzysztof Formela, Aleksander Hejna
Polymers (Basel) 2022 Sep; 14(18): 3838 Published online 2022 Sep 14doi: 10.3390/polym14183838
PMCID: PMC9503757

45: Influence of Diatomaceous Earth Particle Size on Mechanical Properties of PLA/Diatomaceous Earth Composites
Marta Dobrosielska, Renata Dobrucka, Dariusz Brząkalski, Miłosz Frydrych, Paulina Kozera, Monika Wieczorek, Marek Jałbrzykowski, Krzysztof JKurzydłowski, Robert EPrzekop
Materials (Basel) 2022 May; 15(10): 3607 Published online 2022 May 18doi: 10.3390/ma15103607
PMCID: PMC9145730

46: Analysis of Selected Properties of Microporous PLA as a Result of Abiotic Degradation
Aneta Tor-Świątek, Tomasz Garbacz, Petr Stloukal
Materials (Basel) 2022 May; 15(9): 3133 Published online 2022 Apr 26doi: 10.3390/ma15093133
PMCID: PMC9101509

47: Fabrication of PLA/PCL/Graphene Nanoplatelet (GNP) Electrically Conductive Circuit Using the Fused Filament Fabrication (FFF) 3D Printing Technique
Nour-Alhoda Masarra, Marcos Batistella, Jean-Christophe Quantin, Arnaud Regazzi, Monica Francesca Pucci, Roland El Hage, José-Marie Lopez-Cuesta
Materials (Basel) 2022 Feb; 15(3): 762 Published online 2022 Jan 20doi: 10.3390/ma15030762
PMCID: PMC8836401

48: Biogenic Composite Filaments Based on Polylactide and Diatomaceous Earth for 3D Printing
Marta Dobrosielska, Robert Edward Przekop, Bogna Sztorch, Dariusz Brząkalski, Izabela Zgłobicka, Magdalena Łępicka, Romuald Dobosz, Krzysztof Jan Kurzydłowski
Materials (Basel) 2020 Oct; 13(20): 4632 Published online 2020 Oct 16doi: 10.3390/ma13204632
PMCID: PMC7603044

49: Supramolecular Structure of Polypropylene Fibers Extruded with Addition of Functionalized Reduced Graphene Oxide
Jan Broda, Janusz Fabia, Marcin Bączek, Czeslaw Slusarczyk
Polymers (Basel) 2020 Apr; 12(4): 910 Published online 2020 Apr 14doi: 10.3390/polym12040910
PMCID: PMC7240734

50: Composites of Poly(vinyl chloride) with Residual Hops after Supercritical Extraction in CO2
Jacek Mirowski, Rafał Oliwa, Mariusz Oleksy, Edward Roj, Jolanta Tomaszewska, Kamila Mizera, Joanna Ryszkowska
Polymers (Basel) 2021 Aug; 13(16): 2736 Published online 2021 Aug 15doi: 10.3390/polym13162736
PMCID: PMC8399245

51: Structure and Properties of Co-Cr-Mo Alloy Manufactured by Powder Injection Molding Method
Grzegorz Matula, Aleksandra Szatkowska, Krzysztof Matus, Błażej Tomiczek, Miroslawa Pawlyta
Materials (Basel) 2021 Apr; 14(8): 2010 Published online 2021 Apr 16.doi: 10.3390/ma14082010
PMCID: PMC8073040

52: Development of Toughened Flax Fiber Reinforced CompositesModification of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends by Reactive Extrusion Process
Jacek Andrzejewski, Michal Nowakowski
Materials (Basel) 2021 Mar; 14(6): 1523 Published online 2021 Mar 20doi: 10.3390/ma14061523
PMCID: PMC8003650

53: By-Products from Food Industry as a Promising Alternative for the Conventional Fillers for Wood–Polymer Composites
Aleksander Hejna, Jerzy Korol, Paulina Kosmela, Anton Kuzmin, Adam Piasecki, Arkadiusz Kulawik, Błażej Chmielnicki
Polymers (Basel) 2021 Mar; 13(6): 893 Published online 2021 Mar 14doi: 10.3390/polym13060893
PMCID: PMC8000305

54: Processability and Mechanical Properties of Thermoplastic Polylactide/Polyhydroxybutyrate (PLA/PHB) Bioblends
Olga Olejnik, Anna Masek, Jakub Zawadziłło
Materials (Basel) 2021 Feb; 14(4): 898 Published online 2021 Feb 14doi: 10.3390/ma14040898
PMCID: PMC7917826

55: Preliminary Investigation on Auto-Thermal Extrusion of Ground Tire Rubber
Łukasz Zedler, Daria Kowalkowska-Zedler, Henri Vahabi, Mohammad Reza Saeb, Xavier Colom, Javier Cañavate, Shifeng Wang, Krzysztof Formela
Materials (Basel) 2019 Jul; 12(13): 2090 Published online 2019 Jun 28doi: 10.3390/ma12132090
PMCID: PMC6651236

56: Bio-Based Packaging Materials Containing Substances Derived from Coffee and Tea Plants
Olga Olejnik, Anna Masek
Materials (Basel) 2020 Dec; 13(24): 5719 Published online 2020 Dec 15doi: 10.3390/ma13245719
PMCID: PMC7765424

57: Limonene Derivative of Spherosilicate as a Polylactide Modifier for Applications in 3D Printing Technology
Dariusz Brząkalski, Bogna Sztorch, Miłosz Frydrych, Daria Pakuła, Kamil Dydek, Rafał Kozera, Anna Boczkowska, Bogdan Marciniec, Robert EPrzekop
Molecules2020 Dec; 25(24): 5882 Published online 2020 Dec 12doi: 10.3390/molecules25245882
PMCID: PMC7763661

58: Mechanical and Thermal Properties of Polylactide (PLA) Composites Modified with Mg, Fe, and Polyethylene (PE) Additives
Zbigniew Oksiuta, Marek Jalbrzykowski, Joanna Mystkowska, Eliza Romanczuk, Tomasz Osiecki
Polymers (Basel) 2020 Dec; 12(12): 2939 Published online 2020 Dec 9doi: 10.3390/polym12122939
PMCID: PMC7763237

59: Ground Tire Rubber Modified by Ethylene-Vinyl Acetate Copolymer: Processing, Physico-Mechanical Properties, Volatile Organic Compounds Emission and Recycling Possibility
Lukasz Zedler, Paulina Burger, Shifeng Wang, Krzysztof Formela
Materials (Basel) 2020 Oct; 13(20): 4669 Published online 2020 Oct 20doi: 10.3390/ma13204669
PMCID: PMC7594032

60: Silsesquioxane Derivatives as Functional Additives for Preparation of Polyethylene-Based Composites: A Case of Trisilanol Melt-Condensation
Dariusz Brząkalski, Robert EPrzekop, Bogna Sztorch, Paulina Jakubowska, Marek Jałbrzykowski, Bogdan Marciniec
Polymers (Basel) 2020 Oct; 12(10): 2269 Published online 2020 Oct 2doi: 10.3390/polym12102269
PMCID: PMC7601124

61: Preparation of Antimicrobial Fibers from the EVOH/EPC Blend Containing Silver Nanoparticles
Dorota Biniaś, Włodzimierz Biniaś, Alicja Machnicka, Monika Hanus
Polymers (Basel) 2020 Aug; 12(8): 1827 Published online 2020 Aug 14doi: 10.3390/polym12081827
PMCID: PMC7465480

62: Graphite Modified Polylactide (PLA) for 3D Printed (FDM/FFF) Sliding Elements
Robert EPrzekop, Maciej Kujawa, Wojciech Pawlak, Marta Dobrosielska, Bogna Sztorch, Wojciech Wieleba
Polymers (Basel) 2020 Jun; 12(6): 1250 Published online 2020 May 29doi: 10.3390/polym12061250
PMCID: PMC7361995

63: Enhanced thermal properties of poly(lactic acid)/MoS2/carbon nanotubes composites
Piotr Homa, Karolina Wenelska, Ewa Mijowska
Science Rep2020; 10:740 Published online 2020 Jan 20doi: 10.1038/s41598-020-57708-1
PMCID: PMC6971244

64: Fabrication and Characterization of Flexible Medical-Grade TPU Filament for Fused Deposition Modeling 3DP Technology
Agnieszka Haryńska, Iga Gubanska, Justyna Kucinska-Lipka, Helena Janik
Polymers (Basel) 2018 Dec; 10(12): 1304 Published online 2018 Nov 25doi: 10.3390/polym10121304
PMCID: PMC6401970

65: Thermal and Mechanical Properties of Silica-Lignin/Polylactide Composites Subjected to Biodegradation
Aleksandra Grząbka-Zasadinska, Lukasz Klapiszewski, Slawomir Borysiak, Teofil Jesionowski
Materials (Basel) 2018 Nov; 11(11): 2257 Published online 2018 Nov 13doi: 10.3390/ma11112257
PMCID: PMC6266571

66: Study on the flammability, thermal stability and diffusivity of polyethylene nanocomposites containing few layered tungsten disulfide (WS2) functionalized with metal oxides
KWenelska, KMaslana, EMijowska
RSC Adv2018 Apr 3; 8(23): 12999–13007 Published online 2018 Apr 9doi: 10.1039/c8ra01527a
PMCID: PMC9079670

67: Influence of the Conditions of Corotating Twin-Screw Extrusion for Talc-Filled Polypropylene on Selected Properties of the Extrudate
Emil Sasimowski, Lukasz Majewski, Marta Grochowicz
Polymers (Basel) 2019 Sep; 11(9): 1460 Published online 2019 Sep 6doi: 10.3390/polym11091460
PMCID: PMC6781200

68: Exfoliated Molybdenum Disulfide as a Platform for Carbon Nanotube Growth—Properties and Characterization
Karolina Wenelska, Ewa Mijowska
ACS Omega2019 Jun 30; 4(6): 10225–10230 Published online 2019 Jun 13doi: 10.1021/acsomega.8b03425
PMCID: PMC6649178

Information about scientific papers comes from the scientific papers library.

https://www.ncbi.nlm.nih.gov

An official website of the United States government
National Library of Medicine
8600 Rockville Pike
Bethesda, MD 20894